Glittering 16 Pop Stick Photo Frame

by jegatheesan.soundarapandian in Living > Decorating

607 Views, 4 Favorites, 0 Comments

Glittering 16 Pop Stick Photo Frame

20150502_015754.jpg

I found empty space in show case. Have lot of photos in album. Now hot glue gun in hand. Lot of pop stick in the bag. So lets make photo frame. Just use 16 Pop stick, for lovable memories always before my eyes.

Materials Needed

20150502_004344.jpg
20150502_004328.jpg
20150429_233025.jpg
20150501_161149.jpg

Materials and Tools needed

1) Pop Sticks.

2) Hot Glue Gun

3) Glitters.

4) Nail polish.

5) Knife to cut pop stick.

Plan

Plan.JPG

Plan contain only 16 pop stick

1) Base - 6 Pop stick

2) Leg - 1 Pop stick

3) side pillar - 5 Pop stick

4) Support - 2 Pop stick.

5) For hot shape 2 nos - 2 Pop stick

Plan drawing is given above.

Start With Measurement

20150502_004457.jpg

Place the photo on the floor and mark the distance of the pop stick want to paint. Like wise measure the side holder position. After marking start to paste.

Start Gluing

20150502_005235.jpg
20150502_005603.jpg
20150502_010408.jpg
20150502_010912.jpg
20150502_011434.jpg
20150502_011601.jpg
20150502_011750.jpg
20150502_011858.jpg

1) Switch on the hot glue gun and allow it to heat.

2) First make the base take 6 pop stick and as per markings done with photo glue the sticks together in zig-zag.

3) Then make side Pillar, for that take 5 pop stick and cut one pop stick to two pieces(long side). Cut the half pop stick to breadth of the pop stick and take the balance. Now 6 pop stick available.

4) Glue the half pop stick in the middle of two pop stick.

5) Like wise do another pillar.

6) insert the pillar in the base we already made and glue it.

7) Now the photo frame is ready. But the pillars are weak. so to support the pillars glue two pop sticks with the base and the op of the pillar.

8) Cut a pop stick in to two pieces breadth wise and glue it in the bottom base.

9) Now the photo frame is fully ready. I can't fall down easily.

Add Heart

20150502_012713.jpg
20150502_012734.jpg
20150502_013326.jpg

1) Take two pop stick and cut the both the curved edge in a angle as shown in the figure.

2) So 4 Pieces available.

3) Join the pieces together to form Heart shape

Paint and Complete

20150502_013452.jpg
20150502_014400.jpg
20150502_015422.jpg

1) Take some glitters and put it inside the nail polish (I use red nail polish).

2) Mix it well and apply to the front portion of the photo frame.

3) Let the nil polish to dry.

4) After dry Glue the hearts to the bottom and top of the Photo frame (Don't colour the heart or use different color).

5) Now all works completed. Insert the photo into the frame and place it in the show case. If lighting changes it glitters.

Make Few Others

20150502_015432.jpg
20150502_015604.jpg
20150502_015855.jpg
20150502_015906.jpg

I do another frame with inverse coloring, just paint the heart and leave the Frame. Like wise do what ever u want with big size or color.