16777216 Colors Glittering and Glowing

by jegatheesan.soundarapandian in Workshop > Lighting

745 Views, 3 Favorites, 0 Comments

16777216 Colors Glittering and Glowing

20150501_230827_9.jpg
20150501_230827_14.jpg
20150501_230828_15.jpg
20150501_230828_16.jpg

With Pure white Glitters and RGB LED we can able to produce 16777216 of glitters.

Plans

Plan1.JPG
Plan2.JPG
Plan3.JPG

I have three plans to get 16777216 glitters

Plan 1

Focus a RGB light to a glitter object or picture.

Plan 2

Create a Photo Frame with RGB leds focus inside the picture

Plan 3

Create a night lamp umbrella to focus the object.

Plan 3 is very cheap to done. So i selected that plan.

Materials Required

20150501_162135.jpg
20150429_233025.jpg
20150502_004328.jpg
20150501_162437.jpg
20150501_232320.jpg

Materials Required

1) Hard plastic ball.

2) Pure White glitter.

3) Hot Glue Gun.

4) Pop stick

5) Multicolor Flash LED Light (RGB light)

6) Castor Oil

7) Potentiometer.

8) 5V DC adapter.

9) Double Side tape

10) Plan nail polish.

11) Bottle for hold the ball.

Prepare the Umbrella

20150501_154540.jpg
20150501_154713.jpg
20150501_155229.jpg
20150501_155858.jpg
20150501_160941.jpg

1) Paste the double side tape on one side of the ball.

2) Fix the ball over any bottle to hold the ball easy.

3) Apply oil to the top portion of the ball.

4) By using hot glue gun, apply glue over the top half portion of the ball zig zag like umbrella.

5) Allow the glue gun to dry.

6) Remove the glue from the ball. Its look like umbrella.

Apply Glitter and Glow

20150501_162028.jpg
20150501_170553.jpg
20150501_171234.jpg

1) Apply nail polish to the umbrella.

2) Spray as much as Glitters over the umbrella (both top and Bottom).

3) Prepare the Flash LED (or RGB LED), connect the wires and hot glue the terminals.

4) Fix the Light in the middle of the umbrella. Its now ready to hang.

Prepare Stand

20150501_162601.jpg
20150501_163925.jpg
20150501_165248.jpg
20150501_172707.jpg

1) Take 6 Pop stick.

2) Glue the two edges of the pop stick to form the 'Shape' its is the base.

3) Take another two pop stick and make 'V' shape in the long edge and Glue it vertical. Its is the pole.

4) Take another two pop stick and make 'V' shape in the long edge. Expand a Jump clip and make it as 'L' Shape. Join this pop stick with Pole Pop stick using that 'L' shape Jump clip (Used to up down the light)

5) Hang the umbrella u made in the edge of the pop stick and pass the wire through the 'V' shape, so wire hidden under the pop stick.

Connection

Connection.JPG

Give the connection as per diagram. Use Potentiometer to change the brightness and flash type.

Show Case

20150501_173141.jpg
20150501_173237.jpg
Glitter and Glow Umberlla1
20150501_230057.jpg
20150501_225941.jpg
20150501_230050.jpg

Apply Glitters to the show case dolls and place it below the lamp and Switch on the adapter. I show 2 statue pictures.

(My camera cant able to take the photo of Glitter in the umbrella and object)

Crystal Effect

Glitter and Glow Umberlla2
20150501_230827_8.jpg
20150501_230827_9.jpg
20150501_230828_15.jpg
20150501_230828_16.jpg
20150501_230828_17.jpg
20150501_230828_18.jpg
20150501_230828_19.jpg
20150501_230828_20.jpg

When u place Crystal below the umbrella mind blowing effect found. Glitter in the umbrella and glow in the object.

Make one and place crystal doll and comment me.

(My camera cant able to take the photo of Glitter in the umbrella and object)