赫魯斯之眼自動上鎖藏寶盒(Eye of Herus Self-locking Treasure Chest)
by 黃紹維 in Workshop > Laser Cutting
3593 Views, 46 Favorites, 0 Comments
赫魯斯之眼自動上鎖藏寶盒(Eye of Herus Self-locking Treasure Chest)

赫魯斯之眼自動上鎖藏寶盒,利用地心引力的原理上鎖,非常有趣,歡迎下載玩玩看!!(The Eye of Herus automatically locks the treasure box and uses the principle of gravity to lock it. It is very interesting. Welcome to download and play!!)
Downloads
檢查零件(Check the Parts)

檢查零件是否有18個。(Check if there are 18 parts)
打磨(polished)

這些零件需要打磨光滑,上鎖才會順利。我用的是240號砂紙,也可以上蠟。(These parts need to be sanded smooth for smooth locking. I used 240 grit sandpaper, which can also be waxed.)
假組上鎖部分(Fake Group Lock Part)


假組上鎖部分(Fake Group Lock Part)
黏合內盒(Adhesive Inner Box)



黏合內盒(Adhesive Inner Box)
檢查做動(check Action)




檢查做動,只有在特定角度,鎖片才會轉到缺角處,讓盒子能抽出。(Check the action, only at a certain angle, the cleat will turn to the missing corner, allowing the box to be pulled out.)
黏上赫魯斯之眼(Glue to the Eye of Horus)

黏上赫魯斯之眼(Glue To The Eye Of Horus)
組裝外盒(Assemble the Outer Box)



組裝外盒(Assemble The Outer Box)
打磨內盒(Sanding the Inner Box)


打磨內盒,內外盒抽動比較順,將內外盒合在一起,完成!!(Grind the inner box, the inner and outer boxes twitch relatively smoothly, put the inner and outer boxes together, and you are done!!)