木子林泉

一个基础滑板

Do Half the Bridge

首先，拖出一个长方体，并将其长度设置为

30厘米，宽20厘米，高1.5厘米

DO the Rocket of Half the Bridge. Drag Out a Cylinder With a Height of 1.5 and a Diameter of 20

Drag Out a Cube to Hollow Align and Cut Half of the Cylinder in Groups

Make Half of a Cylinder and a Cuboid Into Half of a Bridge

Tilt Half the Cylinder 17 Degrees and Realign

Change the Color of Two Objects and Group Them (color Is Allowed in the Controller)

Copy and Paste the Other Half of the Bridge in a Mirror Image

Align and Make a Complete Bridge and Set It As S1 After Grouping and Merging. Put It Aside for Later Use

Second. Make Bracket Wheels

拖出更多圆柱并将其拉伸到

正确的尺寸来改变颜色

Pull Out the Torus and Stretch It to the Right Size and Change the Color

Align the Two and Group Them Into One Wheel (color Allowed in Control Bar)

Copy and Paste Out Another Wheel, Make Poles A1 With Cylinders and Group Them Into B1

Copy A1, Stretch A1 to 3×1×7cm, and Tilt It 45 Degrees

Line Up the Made Object With B1 As C1, As Shown in the Figure

Drag Out the Cuboid (set to A2) and Change It to Black and Set the Size 12×6×1cm

Splice the 7cm Elevation of A2 and C1 and Group Them Into C2 As Shown in the Figure

Copy A1 Change Its Size to 1×1×5cm and Tilt 45 Degrees to A3

Set A3 and Splicing As C3 As Shown in the Figure

Drag Out Polygons to Size 2×1.73×1cm, Turn White and Tilt 45 Degrees to A4

Splicing A4 and C3 Into C4 As Shown in the Figure

Copy A4, Take A1, Change the Specification to 1×1×3.5cm, and Splicing It Into B2 With A4, and Then Group It Into Groups (the Color Is Set As Color) As Shown in the Figure

Four B2 Were Copied and Reasonably Distributed on C4 to Form C5, As Shown in the Figure

Copy the Mirror Image of C5 and Splicing the Two C5s on S1 As Shown in the Figure