War Machine Inspired Canon Which Shoots Potatos

by kaushtubh in Circuits > Electronics

1016 Views, 7 Favorites, 0 Comments

War Machine Inspired Canon Which Shoots Potatos

instructable 048.JPG

here is wat i made . it is actually a potato cannon which i made getting inspired from war machine............. :_

IM2_WM.jpg

Materials

instructable 021.JPG
instructable 022.JPG
instructable 023.JPG
instructable 024.JPG
instructable 025.JPG
instructable 026.JPG
instructable 027.JPG
instructable 028.JPG

pipe

a charger

a battery holder

a battery

tape

scissors

wires

velcro

and regular tools

Transformer

instructable 029.JPG
instructable 030.JPG
instructable 031.JPG

take the charger and remove all the screws. then cut the wires which were connected to the terminals which go in to the charging point/

instructable 036.JPG
instructable 035.JPG
instructable 037.JPG

take the charger and chop out the black wire. we r goin to need the balack wire so just cop out the round thing

instructable 039.JPG
instructable 040.JPG
instructable 041.JPG
instructable 042.JPG

take the aa batteries and put it in the holder. now take the long black wire from the charger and cut out the top rubber part but not the wire. then take the wire and connect it to one end of the battery holder .now take another wire and connect it to the other end of the battery holder.and then connect the other end of the wire and connect it to the transformer.but remember that connect the wire to the end which was connected to the metal terminals not the long wire.

instructable 034.JPG
instructable 043.JPG
instructable 044.JPG
instructable 045.JPG
instructable 046.JPG

take the pvc pipes and tape one the ends. now make 2 holes in it and put 2 wires inside it.do the same with the other.

and now tape them together . connect these wires to transformer.

instructable 047.JPG
instructable 048.JPG

ya before connecting the pipe wires to the transformer tape the transformer on the 2 pipes and then use the Velcro to tie it to your hand.after this its ready

to make it work spray some deo inside the pipe and then put a piece of potato and then ignite it.