Walking Zombie Machine

1.scissors 2.small cardboard box 3.piece of cardboard 4.crudely drawn zombie 5. about 1 foot of wood dowel 6.tape 7.hot glue gun (optional)

cut small holes about half way dow the side of the box and reenforce the holes with tape

cut out a square about 2 inches then poke a hole in the middle.

wrap the long cardboard piece around the square.

put the square on the dowel about halfway down it. then tape/hot glue it on

put the ends of the dowel in the holes.

make a handle out of dowel and cardboard the stick it onto the end of the other dowel.

make that out of cardboard. make sure the holes are big

cut for of these out

cut 2 wood dowels to be 1inch or less then stick in into one of the holes then stick the cardboard on

tape it into the box so lt lays on the square

cut out the zombie picture then cut of the arms. put the arms onto a dowel.

put the ARMS onto the moving rectangle. put the REST OF THE ZOMBIE on a new stand

move the handle to make the zombies arms move thanks for reading if you liked it vote for it! heres the video: http://youtu.be/XXFHlS9J0vI