Usb Lego Plane

Hi this is my first instructable and i am only 13 so please tell me if there is room for improvement. anyways this is like the lego usb flash drive but much easier. it is a plane of some sort with a usb connector at the back made of lego. plz comment on improvements

you will need to get the usb drive inside by opening the casing. you may need to use pliers.

you will need to cut the "sticky outy bits" off with pliers depending on how big your usb drive is

i used these for wings (remember they need to be the thin pieces)

you will need a piece the same size as the base for this part (i added a bumper for this on the back)

it should look something like this.

i added some finishing touches to mine although it is a bit big now :). here are some pics of different variations because this is just an idea not a manual. customize to your liking

i advise you to super glue this together if anything happens