Super Skewer Gun

4496 Views, 1 Favorites, 0 Comments

Super Skewer Gun

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\skewer gun.jpg$

It looks weak but is very power full
Read all of the instructions to find your materials I did not think to include a materials page sorry

Barrel

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 16.jpg$

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 17.jpg$

take two pens (bic) and take all of the insides out so that you have a pipe and do it in both pens

Take the two pens and tape them together DO NOT GLUE it is not strong enough for the stress put on it use multiple layers of tape to make it stronger

Rubber Band

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 18.jpg$

take a long rubber band like the one on the news paper and then put it near the top of the barrel if you do not have a large rubber band then you can use a smaller thicker one but less far down the barrel

Plunger

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 20.jpg$

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 21.jpg$

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 23.jpg$

You make The plunger out of a long piece of Knex and one of the orange connector things

Hitch the two together with Duct tape like in the picture

Asembly

$C:\Documents and Settings\Dave Hancox\My Documents\My Pictures\Picture 24.jpg$

Take the plunger and stick it in the barrel like the picture