Simple Toilet Paper Holder That Works

This is only a piece of scrap wood cut under 60° and mounted on a wall

It works very well also for paper towels.

The thickness of the piece is depending from the hole of your paper roll.

You can also use a round dowel (may be better)

cut it under 60° ( i also tried 45° but 60° works better)

the length depends if you make it for a toilet paper roll (shorter) or for a paper towel (longer)

mark the position for the hole

drill a bigger hole for the screw head,

then with a smaller one through the wood

use that finish you want.

and cut the excess

pull the paper sidewards to roll

pull the paper downward to tear

and how well it works