Simple Soldering Station From Rubbish
by man-of-light in Circuits > Tools
1289 Views, 10 Favorites, 0 Comments
Simple Soldering Station From Rubbish
![DSCF1298.JPG](/proxy/?url=https://content.instructables.com/FQT/EK78/GRTHMA7N/FQTEK78GRTHMA7N.jpg&filename=DSCF1298.JPG)
![what you need.jpg](/proxy/?url=https://content.instructables.com/F9H/MWJ0/GRTHPM7C/F9HMWJ0GRTHPM7C.jpg&filename=what you need.jpg)
![DSCF1303.JPG](/proxy/?url=https://content.instructables.com/FT6/87G1/GRTHT6X5/FT687G1GRTHT6X5.jpg&filename=DSCF1303.JPG)
![DSCF1299.JPG](/proxy/?url=https://content.instructables.com/FRN/ERZ0/GRTHPK2Q/FRNERZ0GRTHPK2Q.jpg&filename=DSCF1299.JPG)
![DSCF1297.JPG](/proxy/?url=https://content.instructables.com/F72/56J3/GRTHT6X3/F7256J3GRTHT6X3.jpg&filename=DSCF1297.JPG)
![screwing on clothespeg.JPG](/proxy/?url=https://content.instructables.com/FE8/P9M7/GS045TSW/FE8P9M7GS045TSW.jpg&filename=screwing on clothespeg.JPG)
![reattached upper half.JPG](/proxy/?url=https://content.instructables.com/FT3/RUHD/GRTHYNJX/FT3RUHDGRTHYNJX.jpg&filename=reattached upper half.JPG)
![usb socket in position.JPG](/proxy/?url=https://content.instructables.com/FFQ/EMA0/GRTHYNK2/FFQEMA0GRTHYNK2.jpg&filename=usb socket in position.JPG)
heatsinks are an abundant rubbish and have semi-threaded slots to receive screws. so i used these groves on top to clamp a bicycle spoke in place, and the one on the bottom to secure it to the biscuit tin lid. the threaded end of the bicycle spoke i fed a spring on, then a split washer and the to other washers and the screwed the nipple on, so that the spring is compressed and small components to be soldered can be clamped between the washers.
i've also screwed on a clothes peg for holding something larger, like a circuit board, for example.
i've also screwed on a clothes peg for holding something larger, like a circuit board, for example.