Simple No Pump Water Rocket


this is a fairly simple water rocket using only the pressure from your tap ,suprisingly there is alot of force from the tap and this rocket will put it to use in a simple way ,at a low cost . it can reach heights of 10m-20m 30ft-60ft
Materials

you will need:
pvc cement
a male director that screws into a gardina nozzle width 25mm( 1 inch).
about 4cm (2inches) of 15mm pipe (0.6 inches)
a male director that screws into a gardina nozzle width 25mm(1 inch)
Gardina nozzle
cable ties
tools :
hands



screw the male director into the gardina nozzle
(tightly)
(tightly)



just push the pipe onto the male director (it should be tight)




get your threaded pipe and screw it into the plug that fits into the bottle , length dosent matter that much
2 examples shown
2 examples shown




now brush on the cement on the inside of the threaded pipe and the out side of the 15mm pipe
Your Done







now just let the cement dry, mount it onto a post , fit a bottle and hit the water
For Extra Height




the pressure can be improved by covering half of the plug that fits in to the bottle with electrical tape or another thin tape that stretches