Side Table and Lamp
![foto-1.jpg](/proxy/?url=https://content.instructables.com/FYF/FJQN/IC0VD399/FYFFJQNIC0VD399.jpg&filename=foto-1.jpg)
This is a project to reuse an wine box that was already an reuse of a bed box (apparently), and an old golden tacky lamp. I found this wine box on a dumpster and because of the prints I took it immediately.
Rebuilding the Box
![image_10.jpeg](/proxy/?url=https://content.instructables.com/FBV/7N7Y/IC0VD3RU/FBV7N7YIC0VD3RU.jpg&filename=image_10.jpeg)
![image_11.jpeg](/proxy/?url=https://content.instructables.com/FSW/9MEH/IC0VD39L/FSW9MEHIC0VD39L.jpg&filename=image_11.jpeg)
![foto-2.jpg](/proxy/?url=https://content.instructables.com/FDO/RJ1R/IC0VD5OV/FDORJ1RIC0VD5OV.jpg&filename=foto-2.jpg)
![IMG_6158.JPG](/proxy/?url=https://content.instructables.com/FYK/YGIG/IC0VD7X0/FYKYGIGIC0VD7X0.jpg&filename=IMG_6158.JPG)
I took the box apart and rebuilt it to change the nails and I applied wood glue, because the old ones where rusty and fragile.
Than I applied varnish without being to careful on purpose, because I thought some drips would be cool. In one part where there was a hole and the wood sheet was loose, I fixed the sheet with a stapler (also because it looked cool).
Legs
![image_9.jpeg](/proxy/?url=https://content.instructables.com/FUL/BQGP/IC0VD39J/FULBQGPIC0VD39J.jpg&filename=image_9.jpeg)
because I chose to leave the box kind of ragged, I decide to give it nice legs.
So I cut nice trapezoid legs in clear wood and fixate them on the sides with wood screws.
The Lamp
![image_2.jpeg](/proxy/?url=https://content.instructables.com/FLG/Z6LI/IC0VD39D/FLGZ6LIIC0VD39D.jpg&filename=image_2.jpeg)
![image.jpeg](/proxy/?url=https://content.instructables.com/FVZ/Q4ST/IC0VD3A0/FVZQ4STIC0VD3A0.jpg&filename=image.jpeg)
![foto-3.jpg](/proxy/?url=https://content.instructables.com/F0F/HZEK/IC0VD5PH/F0FHZEKIC0VD5PH.jpg&filename=foto-3.jpg)
I had this lamp with golden body and dirty shades, so I sprayed with blue ink. Simple as that.
Finished!
![image_7.jpeg](/proxy/?url=https://content.instructables.com/FY7/Y4WF/IC0VD39E/FY7Y4WFIC0VD39E.jpg&filename=image_7.jpeg)
![image_8.jpeg](/proxy/?url=https://content.instructables.com/FGH/GIOW/IC0VD39I/FGHGIOWIC0VD39I.jpg&filename=image_8.jpeg)