Safety Goggles Modification (SGM)

 This instructable will show you how to place a flashlight on safety goggles so you won't have to hold a flashlight when you have to do something with two hands. This is meant to be an on-the-field modification, as with the name.

This is also known as the SGI (Safety Goggles Illuminator).

Don't forget to rate!

You'll need :
-tape, as said in the previous version, electrical tape will do best for this
-LED flashlight, I recommend using high power LED's, I bought high power flashlight for USD 60 cents. It is extremely light, and is a good shine per buck flashlight.
Tools:
-scissors

 Cut 2 lengths of tape of the same length. Tape at the positions shown in the image, and that's it.

Now to use this just wear and turn on the flashlight

This must be the simplest instructable I made so far. Really, look at my other i'bles.