#include 
 
Servo myservo;  // create servo object to control a servo
// twelve servo objects can be created on most boards
 
int pos = 0;    // variable to store the servo position
 
void setup() {
  digitalWrite(10,HIGH
  );
  myservo.attach(9);  // attaches the servo on pin 9 to the servo object
}
 
void loop() {
  for (pos = 0; pos <= 180; pos += 3) { // goes from 0 degrees to 180 degrees // in steps of 1 degree myservo.write(pos); // tell servo to go to position in variable 'pos' delay(5); // waits 15ms for the servo to reach the position } for (pos = 180; pos >= 0; pos -= 3) { // goes from 180 degrees to 0 degrees
    myservo.write(pos);              // tell servo to go to position in variable 'pos'
    delay(5);                       // waits 15ms for the servo to reach the position
  }
}