//---------------------------------------
//Item Definition
//---------------------------------------
/*Laundry Room */
//in the <OpenHAB15\webapps\images> folder
//create 3 pngs
//    myalarm.png
//    myalarm-off.png
//    myalarm-on.png
//    mylight.png
//    myalarm-0.png
//    myalarm-1.png
Number itm_laun_dryer_mqtt "Dryer [MAP(laundry.map):%s]" (ALL) {mqtt="<[mymosquitto:3042:state:default]"}
Number itm_laun_washer_mqtt "Washer [MAP(laundry.map):%s]" (ALL) {mqtt="<[mymosquitto:3052:state:default]"}
Switch itm_laun_water_leak_alm_enb "Laundry Water Leak Notifier"
Switch itm_laun_water_leak_alm_sta "Laundry Water Leak Status" <myalarm>
Number itm_laun_water_leak_mqtt "Water Leak" (ALL) {mqtt="<[mymosquitto:3032:state:default]"}
Number itm_laun_temp "Laundry Room Temp [%.1f °F]" <temperature> (All) {mqtt="<[mymosquitto:3022:state:default]"}
Number itm_laun_hum "Laundry Room Humidity [%.1f %%]" <temperature> (All) {mqtt="<[mymosquitto:3023:state:default]"}
Number itm_laun_light_mqtt "Light Sensor [%.1f]" (ALL) {mqtt="<[mymosquitto:3062:state:default]"}
Number itm_laun_light_icon "Laundry Room Light" <mylight>


//---------------------------------------
//Site Map
//---------------------------------------
		Text label="Laundry Room" icon="firstfloor" {
			Frame label="Laundry Room Status"
			{
				Text item=itm_laun_dryer_mqtt valuecolor=[<1="gray",==1="green",>1="red"] labelcolor=[<1="gray",==1="green",>1="red"]
				Text item=itm_laun_washer_mqtt valuecolor=[<1="gray",==1="green",>1="red"] labelcolor=[<1="gray",==1="green",>1="red"]
                Text item=itm_laun_temp
                Text item=itm_laun_hum
                Text item=itm_laun_light_icon
                Switch item=itm_laun_water_leak_alm_sta mappings=[OFF="Reset"]
                //Text item=itm_laun_water_leak_alm_sta valuecolor=[==0="black",==1="red"] labelcolor=[==0="black",==1="red"]
            }
			Frame label="Alarm Enable"
			{
				Switch item=itm_laun_water_leak_alm_enb
			}

		}

//---------------------------------------
//Rules
//---------------------------------------
rule "Laundry Lights"
        when
                Item itm_laun_light_mqtt received update
        then
                if(itm_laun_light_mqtt.state < 350)
                {
                    sendCommand(itm_laun_light_icon, 0)
                }
                else
                {
                         sendCommand(itm_laun_light_icon, 1)
                }
end

rule "Washer Complete"
        when
                Item itm_laun_washer_mqtt received update
        then
                if(itm_laun_washer_mqtt.state == 2)
                {
                    say("Washer Complete!")
                }
end
rule "Dryer Complete"
        when
                Item itm_laun_dryer_mqtt received update
        then
                if(itm_laun_dryer_mqtt.state == 2)
                {
                    say("Dryer Complete!")
                }
end

/* --------- Laundry Water Leak  ---------- */
rule "Laundry Water Leak"
        when
                Item itm_laun_water_leak_mqtt received update
        then
        		sendCommand(itm_laun_water_leak_alm_sta, ON)
                
end

rule "Laundry Water Leak response"
        when
                Item itm_laun_water_leak_alm_sta changed from OFF to ON
        then
        		if(itm_laun_water_leak_alm_enb.state == ON)
                {
                	sendMail("email_Address@domain.com", "laundry water leak" , "laundry water leak detected")
                }
                //playSound("alarm.mp3")
end