Author: Muhammad Adeel Ijaz
Email: revolutionbug@outlook.com
Twitter: twitter.com/revolutionbug
LinkedIn: linkedin.com/in/revolutionbug

===================================================
Texas Instruments EK-TM4C123GXL LCD Communication:-
===================================================
This is a breadboard based project by which we can do Serial Communication with microcontroller.
We can get our output on 16x2 LCD screen. The input is given to microcontroller using terminal software installed on pc.

===============
Requirements:-
===============
1- Texas Instruments EK-TM4C123GXL
2- Potentiometer (eg 5K)
3- LCD 16x2
4- Virtual Terminal	(software on PC)
5- LM Flash Programmer	(software on PC)

===========
Pin-outs:-
===========
====================================
TM4C123GXL    ||        LCD
====================================
VBUS                    VDD or VCC
GND                     VSS
PB4                     RS
GND                     RW
PE5                     E
PE4                     D4
PB1                     D5
PB0                     D6
PB5                     D7
+3.3V                   A
GND                     K

====================================
TM4C123GXL    ||     Potentiometer
====================================
VBUS                    1st pin
GND                     3rd pin

====================================
Potentiometer ||        LCD
====================================
2nd pin                 Vo
=> You can set contrast using Potentiometer