#ifndef _ALTERA_HPS_0_H_
#define _ALTERA_HPS_0_H_

/*
 * This file was automatically generated by the swinfo2header utility.
 * 
 * Created from SOPC Builder system 'soc_system' in
 * file '/cygdrive/c/Users/noe/Documents/my_first_hps-fpga_base_DAC/soc_system.sopcinfo'.
 */

/*
 * This file contains macros for module 'hps_0' and devices
 * connected to the following masters:
 *   h2f_axi_master
 *   h2f_lw_axi_master
 * 
 * Do not include this header file and another header file created for a
 * different module or master group at the same time.
 * Doing so may result in duplicate macro names.
 * Instead, use the system header file which has macros with unique names.
 */

/*
 * Macros for device 'onchip_memory2_0', class 'altera_avalon_onchip_memory2'
 * The macros are prefixed with 'ONCHIP_MEMORY2_0_'.
 * The prefix is the slave descriptor.
 */
#define ONCHIP_MEMORY2_0_COMPONENT_TYPE altera_avalon_onchip_memory2
#define ONCHIP_MEMORY2_0_COMPONENT_NAME onchip_memory2_0
#define ONCHIP_MEMORY2_0_BASE 0x0
#define ONCHIP_MEMORY2_0_SPAN 65536
#define ONCHIP_MEMORY2_0_END 0xffff
#define ONCHIP_MEMORY2_0_ALLOW_IN_SYSTEM_MEMORY_CONTENT_EDITOR 0
#define ONCHIP_MEMORY2_0_ALLOW_MRAM_SIM_CONTENTS_ONLY_FILE 0
#define ONCHIP_MEMORY2_0_CONTENTS_INFO ""
#define ONCHIP_MEMORY2_0_DUAL_PORT 0
#define ONCHIP_MEMORY2_0_GUI_RAM_BLOCK_TYPE AUTO
#define ONCHIP_MEMORY2_0_INIT_CONTENTS_FILE soc_system_onchip_memory2_0
#define ONCHIP_MEMORY2_0_INIT_MEM_CONTENT 1
#define ONCHIP_MEMORY2_0_INSTANCE_ID NONE
#define ONCHIP_MEMORY2_0_NON_DEFAULT_INIT_FILE_ENABLED 0
#define ONCHIP_MEMORY2_0_RAM_BLOCK_TYPE AUTO
#define ONCHIP_MEMORY2_0_READ_DURING_WRITE_MODE DONT_CARE
#define ONCHIP_MEMORY2_0_SINGLE_CLOCK_OP 0
#define ONCHIP_MEMORY2_0_SIZE_MULTIPLE 1
#define ONCHIP_MEMORY2_0_SIZE_VALUE 65536
#define ONCHIP_MEMORY2_0_WRITABLE 1
#define ONCHIP_MEMORY2_0_MEMORY_INFO_DAT_SYM_INSTALL_DIR SIM_DIR
#define ONCHIP_MEMORY2_0_MEMORY_INFO_GENERATE_DAT_SYM 1
#define ONCHIP_MEMORY2_0_MEMORY_INFO_GENERATE_HEX 1
#define ONCHIP_MEMORY2_0_MEMORY_INFO_HAS_BYTE_LANE 0
#define ONCHIP_MEMORY2_0_MEMORY_INFO_HEX_INSTALL_DIR QPF_DIR
#define ONCHIP_MEMORY2_0_MEMORY_INFO_MEM_INIT_DATA_WIDTH 64
#define ONCHIP_MEMORY2_0_MEMORY_INFO_MEM_INIT_FILENAME soc_system_onchip_memory2_0

/*
 * Macros for device 'adc_0', class 'altera_up_avalon_adc'
 * The macros are prefixed with 'ADC_0_'.
 * The prefix is the slave descriptor.
 */
#define ADC_0_COMPONENT_TYPE altera_up_avalon_adc
#define ADC_0_COMPONENT_NAME adc_0
#define ADC_0_BASE 0x0
#define ADC_0_SPAN 32
#define ADC_0_END 0x1f

/*
 * Macros for device 'spi_0', class 'altera_avalon_spi'
 * The macros are prefixed with 'SPI_0_'.
 * The prefix is the slave descriptor.
 */
#define SPI_0_COMPONENT_TYPE altera_avalon_spi
#define SPI_0_COMPONENT_NAME spi_0
#define SPI_0_BASE 0x20
#define SPI_0_SPAN 32
#define SPI_0_END 0x3f
#define SPI_0_IRQ 0
#define SPI_0_CLOCKMULT 1
#define SPI_0_CLOCKPHASE 0
#define SPI_0_CLOCKPOLARITY 0
#define SPI_0_CLOCKUNITS "Hz"
#define SPI_0_DATABITS 16
#define SPI_0_DATAWIDTH 16
#define SPI_0_DELAYMULT "1.0E-9"
#define SPI_0_DELAYUNITS "ns"
#define SPI_0_EXTRADELAY 0
#define SPI_0_INSERT_SYNC 0
#define SPI_0_ISMASTER 1
#define SPI_0_LSBFIRST 0
#define SPI_0_NUMSLAVES 1
#define SPI_0_PREFIX "spi_"
#define SPI_0_SYNC_REG_DEPTH 2
#define SPI_0_TARGETCLOCK 12500000
#define SPI_0_TARGETSSDELAY "0.0"

/*
 * Macros for device 'pio_bouton', class 'altera_avalon_pio'
 * The macros are prefixed with 'PIO_BOUTON_'.
 * The prefix is the slave descriptor.
 */
#define PIO_BOUTON_COMPONENT_TYPE altera_avalon_pio
#define PIO_BOUTON_COMPONENT_NAME pio_bouton
#define PIO_BOUTON_BASE 0x40
#define PIO_BOUTON_SPAN 16
#define PIO_BOUTON_END 0x4f
#define PIO_BOUTON_BIT_CLEARING_EDGE_REGISTER 0
#define PIO_BOUTON_BIT_MODIFYING_OUTPUT_REGISTER 0
#define PIO_BOUTON_CAPTURE 0
#define PIO_BOUTON_DATA_WIDTH 3
#define PIO_BOUTON_DO_TEST_BENCH_WIRING 0
#define PIO_BOUTON_DRIVEN_SIM_VALUE 0
#define PIO_BOUTON_EDGE_TYPE NONE
#define PIO_BOUTON_FREQ 50000000
#define PIO_BOUTON_HAS_IN 1
#define PIO_BOUTON_HAS_OUT 0
#define PIO_BOUTON_HAS_TRI 0
#define PIO_BOUTON_IRQ_TYPE NONE
#define PIO_BOUTON_RESET_VALUE 0

/*
 * Macros for device 'sysid_qsys', class 'altera_avalon_sysid_qsys'
 * The macros are prefixed with 'SYSID_QSYS_'.
 * The prefix is the slave descriptor.
 */
#define SYSID_QSYS_COMPONENT_TYPE altera_avalon_sysid_qsys
#define SYSID_QSYS_COMPONENT_NAME sysid_qsys
#define SYSID_QSYS_BASE 0x10000
#define SYSID_QSYS_SPAN 8
#define SYSID_QSYS_END 0x10007
#define SYSID_QSYS_ID 2899645186
#define SYSID_QSYS_TIMESTAMP 1513088015

/*
 * Macros for device 'jtag_uart', class 'altera_avalon_jtag_uart'
 * The macros are prefixed with 'JTAG_UART_'.
 * The prefix is the slave descriptor.
 */
#define JTAG_UART_COMPONENT_TYPE altera_avalon_jtag_uart
#define JTAG_UART_COMPONENT_NAME jtag_uart
#define JTAG_UART_BASE 0x20000
#define JTAG_UART_SPAN 8
#define JTAG_UART_END 0x20007
#define JTAG_UART_IRQ 2
#define JTAG_UART_READ_DEPTH 64
#define JTAG_UART_READ_THRESHOLD 8
#define JTAG_UART_WRITE_DEPTH 64
#define JTAG_UART_WRITE_THRESHOLD 8


#endif /* _ALTERA_HPS_0_H_ */