Moving/walking Coffee Cup

Hello this is my second Instructable that i have made i hope you like it.

-tape (any kind)
-wire
-motor
-battery
-screw
-coffee cup
-light (optional)
-paper clips

connect the wires to the motor like shown

wrap tape around the motor like shown

connect one of the wires to the battery like shown

now take a screw and tape it onto the motor like shown in the pictures

now the light is optional but i like it so...im going to show you

take the wire you connected to the battery and wrap around the corresponding wire of the light do the same with the other wire like in the picture

take the wire previosley taped to the battery and re-tape it like in the picture

now cut a hole about the size of your light and then stick the light in the hole

now do the same thing you did with the light and do it with the motor but it must be closer to the bottom

now put some paper clips on the bottem like in the pictures.

then tape the light and motor in there places then shove the rest of the assembly into the cup and connect the last loose wire to the battery and put on the lid then watch it go.

I hope you had fun building the robot-cup as well with watching it scuttle along please leave comments.