Mountain Cannon

by hrymil in Workshop > Science

2777 Views, 6 Favorites, 0 Comments

Mountain Cannon

cut cans.jpg
scratches in bottom.jpg
bottom hole.jpg
top holes.jpg
assembled.jpg
v up.jpg
cans.jpg
cans.jpg
cans.jpg
cut cans.jpg
cut cans.jpg
cut cans.jpg
cut cans.jpg
scratches in bottom.jpg
bottom hole.jpg
top holes.jpg
assembled.jpg
assembled.jpg
v up.jpg
cut cans.jpg
cut cans.jpg
cut cans.jpg
1.Remove tabs from all 7 cans.
2.Cut top and bottom from 6 cans. Allow so they can interlock.
3.Cut top of can as close to rim as possible.
4.Cut bottom so it has large opening.
5.Drill �urn can so tab hole is facing up and scratch a V in rear so u can tell when hole is up.
7.Tape all cans together leaving whole can on bottom. Use electrical tape.
8.Wrap at least 2 times with electrical tape.
9.Turn so V at bottom is up and put 1 squirt of lighter fluid in it. (only cigarette lighter fluid)
10.shake 50 times.
11.hold away from everything.
12.light with extended lighter.
13.BOOM!

Cut Cans

cut cans.jpg

Hole Bottom

scratches in bottom.jpg

V in Bottom

bottom hole.jpg

Holes Top

top holes.jpg

Assembled

assembled.jpg

V in Bottom

v up.jpg