Micro Rc Heli to Rc Plane

This is how i made a old micro rc heli into a flying 2 channel rc plane.

ALL up cost about $4 nz as i allready had a micro rc heli.

A 3 channel micro rc helicopter like the one below.
A $2.00 ruber band powered foam plane.
A hot glue gun.

Get your ruber band powered plane and asemble it but with out the rubber band or the propeler.

pull apart rc helicopter.  

atatching all parts together. just follow the video its simple just hot glue everything on.

ok now you have a finished IR rc plane made for about $4 the range isn't that far and it depends on how you set the board on the plane as to how much range you get.