Lego Nerf Dart

I am a big lego fan and also a big fan of nerf guns, so i had to figure out a way to mix the two and then came up with this amazing dart.

1 lego peg connector
1 little lego spacer
1 little peg (does not need to be red)
1 nerf dart ( tip ripped off)
and crazy glue

it is hard to explain what pieces go where so  just follow the pics.

ok now I can explain it. so you want to push the lego into the nerf dart, making sure that a little bit of the peg connector is out of the dart.

now take your crazy glue and glue in 2 spots. on spot where the stopper meets the red peg, and glue all around where the connector is gust above the dart. then let dry over night and fire away!

sorry I don't have any pics on this step but it is pretty easy to do. 

if you want to hold more of these darts then gust glue the large stopper (the small stopper was used to make the dart) on to a flat and/or easily accessible spot on the nerf gun.

i have a modded "i don't know" gun so don't quote me on the distances. 
I took three shots which where 48',50',and 47'. that averages out to 48.333333333333333 e.t.c but we will round it to 48'