Laser Printer Carrying Case Home Made

ever wanted to carry your laser printer or anything that is fragile on a plane,car,or moving company and not worry about.
I fitted this luggage bag with some foam and it does the trick.'''''''''

*foam (meant for single bed)

*utility knife

*long enough ruler or like I did a scrap piece of 4x4

• hot glue gun
• plenty of glue sticks

*scissors

*felt pen

*piece of hard cardboard(I use the box from the printer)

only need to cut the bottom part, depends on the case you are using.

add a bit of support by adding some cardboard to the back of the case glue it down of course.

now measure the lid and around the inside and start using that glue gun you had for a long time wanted to use it.

and yes , measure 'cause I try not measuring and I find out foam moves a lot ,ah yes the felt pen that's what I use it for.