Ksp-1

by knexsniper1 in Living > LEGO & K'NEX

1807 Views, 6 Favorites, 0 Comments

Ksp-1

DSC_0098.JPG
DSC_0099.JPG
This is the hand gun that I made. I have now added a trigger to the gun, so it is different than the one you may have seen on the slidshow. In total, this instructables uses a lot of pictures(only because I want my first instructables to have as less problems with pictures as possible)

Pros:
-shoots about 60+ ft. but can shoot farther by using the orange connectors at the bottom as a pump
-true trigger
-mag for 4 bullets
-mag never jams
-working sight
-no firing pin sticking out the back
-has an incredible rubberband to range ratio. (can get past 60 feet with only one rubberband)
-according to DrWeird117, the gun could shoot 30 feet accurately

Cons:
-uses a moderate amount of pieces
-some people say that the handle is not very comfy

Handle

DSC_0079.JPG
DSC_0080.JPG
DSC_0085.JPG
DSC_0086.JPG
DSC_0087.JPG
DSC_0088.JPG
DSC_0092.JPG
DSC_0093.JPG
DSC_0094.JPG
DSC_0095.JPG
This is the handle of the gun

Body of Gun

DSC_0101.JPG
DSC_0105.JPG
DSC_0107.JPG
DSC_0108.JPG
DSC_0110.JPG
DSC_0111.JPG
DSC_0113.JPG
DSC_0115.JPG
DSC_0116.JPG
DSC_0119.JPG
DSC_0121.JPG
DSC_0124.JPG
DSC_0128.JPG
DSC_0129.JPG
DSC_0131.JPG
DSC_0132.JPG
This is the body of the gun, it may seem flimsy, but after attached, it becomes more sturdy

Barrel

DSC_0134.JPG
DSC_0140.JPG
DSC_0136.JPG
DSC_0135.JPG
DSC_0143.JPG
DSC_0145.JPG
DSC_0146.JPG
DSC_0148.JPG
DSC_0147.JPG
DSC_0153.JPG
DSC_0155.JPG
DSC_0156.JPG
DSC_0157.JPG
DSC_0158.JPG
DSC_0163.JPG
DSC_0166.JPG
DSC_0167.JPG
DSC_0170.JPG
DSC_0171.JPG
DSC_0174.JPG
DSC_0180.JPG
DSC_0181.JPG
DSC_0134.JPG
DSC_0135.JPG
This is the barrel of the gun. it is connected to the magazine, and can store up to 5 bullets, but is more sturdy with 4.