Knex Benillie Montefeltro Shotgun

here's the benillie montefeltro shotgun. this is one of my most sturdy gun it used that break action shells mechanism from s0lekill3r.
it shoots about 40 ft
p.s don't shoot on the santa because i want some presents too
if you want to shoot on somebody shoot on your little brother
don't forget to rate
if you want to know something post a comment

and check out my newest forum

part list by killjoy (thanks for that)

CONNECTORS
White 76
Orange 70
Red 14
Grey 69
Light Grey 1
Yellow 91
Blue 2
Green 5

RODS
Broken White 1
Broken Blue 1
Grey 12
Yellow 16
Blue 38
Green 192
White 193
Bendy Orange 1
Black "Reinforced Grey" 2

MISC.
Ballsocket 4
Balljoint 12
Hinge With Hole 3
Hinge With Point 1
Blue Spacer 4
Y connector 27
Tan Clip 2

Thats a total of about 837 parts.

follow the pictures

this part i really like
just follow the pictures

ghtydvnrnvdkf just follow the pictures again

again

connect all the parts

this is the only step I typ so
1 put the ram backwards
2 take the shells
3 put two green rods in the shells or one white rod
4 break the shotgun
5 put the shells in the body look to picture 2 and 3
6 break it back
7 pull the trigger
8 take the ram back
9 break the shotgun
10 take off the shells
11 repeat all the steps