Knex Switch Blade
cool knife easy instructions
piece list
connectors
yellow 21
red 2 (one needs modifying
green 1
light grey 2 slots 1
grey 1 slot 3
rods
green 26
white 20
blue 2
others
y clips 6
blue spacers 2
don't forget to rate and comment thanks have fun
piece list
connectors
yellow 21
red 2 (one needs modifying
green 1
light grey 2 slots 1
grey 1 slot 3
rods
green 26
white 20
blue 2
others
y clips 6
blue spacers 2
don't forget to rate and comment thanks have fun
Getting the Bits
just follow the pics and make what you see in the picture
Putting It Together
just follow pics
pic 1 the red connecter has to be cut to fit but if you don't want to take the white rod out
pic 2 put the long piece on
pic 3 put the other side on
pic 4 the 2 y clips go in to the yellows
pic 1 the red connecter has to be cut to fit but if you don't want to take the white rod out
pic 2 put the long piece on
pic 3 put the other side on
pic 4 the 2 y clips go in to the yellows
Putting on the Rubber Band and How It Works
just follow pics and instructions
pic 1 put the rubber band through the hole in the yellow connector
pic 2 stretch the rubber band down to the white rod and put it on it do the same on the other side as well
pic 3 un clip the y clip and push the blade down in to the body and push in the grey clip with the white rod on it
pic 4 when you want the blade out just pull out the grey clip outwards
pic 1 put the rubber band through the hole in the yellow connector
pic 2 stretch the rubber band down to the white rod and put it on it do the same on the other side as well
pic 3 un clip the y clip and push the blade down in to the body and push in the grey clip with the white rod on it
pic 4 when you want the blade out just pull out the grey clip outwards