Knex Carbine Rifle

here is my newest project
this is a gun based of the the "the not retancle'' from KI
i used the disign and the wonderfully trigger from zak WATCH THE VID ON YOUTUBE
this gun used a new concept that prefents the ram from breaking
the ram don't break because it does not stop by the end but by the begin of the ram
so you can put as many rubberbands as you want on it
it shoots 2 shots at one
the trigger is disigned by zak and can have a lot of power

some stats:
-shoots about 30 feet with a white rod
-shoots about 50 feet with a oodammo
-shoots about 100 feet with a sniper round
-two shots at one
-great ram guide
-high rof
-comfy handle
-good sight (not that great)
-great trigger
-strong body
-ammo lock

I GIVE FULL CREDITS TO THE MIGHTY ZAK

please rate this gun on his performes and not on his looks
PLEASE RATE AND SUBSCRIBE

so let's get build it

first the part list

rods:

green rod: 173
white rod: 55
bleu rod: 27
yellow rod: 1
red rod: 1
gray: 2 or 0 if you use black rods
black rod: 2 or 4 if you want a strong ram guide (required)
broken white: 1 (sorry)
-------------------------------------------------------------------------------------------------------------------------------------
connectors

tan con: 4
gray con: 39
light gray con: 3
orange con: 22
red con: 21
green con: 11
yellow con: 87
bleu con: 4
white con: 0
-------------------------------------------------------------------------------------------------------------------------------------
misc:

y con: 12
ball socket: 9
ball joint: 1
metallic con: 2
small wheels bands: 2
small rubberband: 2
big rubberband: 1

note: 2 tan cons by the trigger ar metallics