Knex Fmg-9 Instructions
EVERYBODY I AM MAD BECAUSE I READ THE COMENTS AND THERE NOT THAT NICE. SO KEEP YOU OPION TO YOUR SELF UNLESS IT IS SOMETHING GOOD BECASUE THIS IS A PROTOTYPE I KNOW IT'S NOT THE BEST GUN OUT THERE BUT I TRYED TO BUILD A GUN FOR ONCE AND ALL I GOT IS SOME RUDE COMENTS. AND YOU PEOPLE KNOW WHO YOU ARE.
pros:
Decent range for what bands i have on it
Small
Not many peices
cons:
Not the best
Two cut peices
Ammo green rods
Needs a magazine if any one can build one please leave a comment and some pictures it would help alot thank you
peices:
Green rods: 52
White rods: 18
Blue rods: 11
Red rods: 1
Connectors:
Yellow connectors: 17
Y connectors: 4
Red 3 slot connectors: 24
White 8 slot connectors: 12
Orange 2 slot connectors: 2
Gray 1 slot connectors: 4
Blue clip: 1
Y connectors: 6
Hinge: 1
Blue spacers: 2
Rubber bands: 3
IMPORTANT!!!!!! READ THE NOTES
pros:
Decent range for what bands i have on it
Small
Not many peices
cons:
Not the best
Two cut peices
Ammo green rods
Needs a magazine if any one can build one please leave a comment and some pictures it would help alot thank you
peices:
Green rods: 52
White rods: 18
Blue rods: 11
Red rods: 1
Connectors:
Yellow connectors: 17
Y connectors: 4
Red 3 slot connectors: 24
White 8 slot connectors: 12
Orange 2 slot connectors: 2
Gray 1 slot connectors: 4
Blue clip: 1
Y connectors: 6
Hinge: 1
Blue spacers: 2
Rubber bands: 3
IMPORTANT!!!!!! READ THE NOTES
The Body of the Gun
The Front Part of the Gun
Putting the Gun Together
almost done
Putting Rubber Bands On
so close
Done
so now you pull the firing pin back far enough so you can push the bullet in the breech on the top and then aim and FIRE. remember don't point at faces have fun and remember it shots green rods.