Chevy Knex Show Car - Instructable
by trophytruckbuilder in Living > LEGO & K'NEX
5985 Views, 10 Favorites, 0 Comments
Chevy Knex Show Car - Instructable
This is the instructable of the car. This took me quite a while.
The Doors and Sides
this is an easy step
The Doors and Roof
also an easy step
Engine
the v8
The Chassis
this step is alittle more tricky
when you finish this step you will need to connect the two chassis pieces, the last photo shows the connection.
when you finish this step you will need to connect the two chassis pieces, the last photo shows the connection.
The Hood/bonnet, Front End, Speakers, Pedals and Split Boot/trunk
this step is pretty easy
1 the trunk/boot
2 the hood/bonnet
3 the front end
4 the pedals
5 the speakers
1 the trunk/boot
2 the hood/bonnet
3 the front end
4 the pedals
5 the speakers
Assembly
putting the parts you have built together.
1 put the sides on
2 attach the boot
3 put seats in
4 attach the roof
5 attach the front end and make little pins to hold it to the side panels
6 attach bonnet
1 put the sides on
2 attach the boot
3 put seats in
4 attach the roof
5 attach the front end and make little pins to hold it to the side panels
6 attach bonnet
Rubber Bands
a very simple step
pic 1 pull this one down
pic 2 attach it here
pic 3 add this one and attach it like so
pic 1 pull this one down
pic 2 attach it here
pic 3 add this one and attach it like so
Axles and Side Pegs
add axles and side pegs .
on picture 9/10 you will need to remove the part shown on pic 10. I made a mistake when showing how to make the chassis, I put one too many of the red pieces with the white rods in the middle
on picture 9/10 you will need to remove the part shown on pic 10. I made a mistake when showing how to make the chassis, I put one too many of the red pieces with the white rods in the middle
FINISHED YAY!!!!!!!!!!!!!!
YOU'RE FINISHED