Knex Ball Machine Flashback Elements

hi this is an instructable for how to build some cool elementsfrom flashback.
i hope it's clear enough!
sorry for bad english, i'm from holland.

this is another design, but it works as good as trainman's one.
it's not invented by me, but by kagekumo, but i never saw an instructable of it.

it was hard to make this corkscrew work, but i did it!
it might be hard to make it work. just modify it a little.
make sure that you drop start is three red rods above the begin.

i made stairs!
not hard, good working

well, it needs lots of orange connectors, but it works really good and it can be bended in all directions and it sounds nice.
this is a solution for when you don't know how to connect awsome elements.

this is a good working ferris wheel.

i made this from the pieces i had left

ball rolls down and it makes a nice sound.

the ball rolls and falls and rolls again........

i know it is a hard element, so make sure you support it very good.

this works best when you don't make it too steep.

took me ten minutes to create

takes less knex and looks good

the ball chooses the way it goes.
you can make it wider or higher and it can be used diagonally
not my idea

use this for slowing a ball on orange slide.

used for flying balls

succes on your own ball tower!