Ipod Nano Card Case

this is my first instructable i will show you how to make a ipod nano case from half a deck of cards.

-deck of cards
-pen
-white glue
-paint brush
-ipod nano
-sharp knife
-tape
-ruler

take one card and put a ring of glue around the card

take the paint brush and spread the glue around.

put another card on top of the glued card and line up the edges

repeat steps 2,3 and 4 over and over until you have used about half of the deck of cards.

trace your ipod onto a card but remember to leave a spot for the headphones.

take the traced piece and cut it out then put it on top of the deck of glued cards and trace it onto the deck.

take your sharp knife and cut into the deck on the traced line you made with pen. cut until you only have about 5 cards not cut.

take your ipod nano and see it it will fit in or not. if it does not cut the cards down a little

take a ruler and measure how far the screen is in. take one card and cut it out

to glue it on the stack of cards only glue 3 sides to you can take your ipod nano in and out when you need to charge it or what ever.

glue two cards front to front

tape the cover on and make the cover like a hinge. put an apple sticker on the front and your done enjoy. :)