IPhone 5/5s or Early Generations PVC Amplifier

Materials:

-2 Coffee cups

-PVC cutter

-Sharpie

-Rule

- knife

-Valencia pipe 1.25

-Drill and Drimmel

-Spray Paint(Optional)

Cut the PVC Pipe to 9 inches with PVCC Pipe.

Use a drill to drill a hole for the iPhone to fit in. After using drill use a dremel to make the hole big enough for the iPhone.

Draw circles with a marker (sharpie best), so the PVC pipe can fit through them.

Use a knife to cut out the circles that were drawn with the marker. Try to make these as accurate to the circle drawn.

The two cups that you cut a hole in, connect on two ends of PVC pipe with hot glue.

cover all holes with tape to spray paint outside.

Spray paint all sides with any color of your choice. Make sure to cover all spots.

Remove all tape covering the holes when paint has dried.

Use a paint brush and spray paint to cover all spots that did not get sprayed after the tape has been removed.

Turn music on phone to any volume, and put in hole of PVC pipe. Listen to your music being amplified.