IPhone 4S Back Glass Repair

A specialy designed, wodden back pannel for iPhone 4S

First of all I needed to take all the parts of cracked screen from the panel. To be honest it wasn`t very easy.

I chose red wood, because it was the darkest one that i could find. Also the panel was full of glue so I cleaned it with acetone.

The piece of wood wasn`t very big, so cut and attached it to the panel very fast. Then i needed to take some layers from it, cause it was quite thick.

Another hard step was to put the logo. i didn`t have profesional instruments to burn the wood propperly, so i did it with soldering. The glas for the camera was taken from the cracked glass ( If you apply pressure it comes out of glass quite easily ).

And the final step was covering the wooden surface with vanish to make it darker and to show the texture of wood.