How to Make a Simple Laser 5mW

well, it's my first instructable, and I'll show how to make a red laser pointer (5mW)

you will need:

- 5mW laser module - 14$

- batteries of phone  4.5V - 4.90$

- switches x2 - 0.60$

- pvc tube (i used 3cm diameter)

- wire

- adhesive tape

- hot glue

Make two holes in PVC pipe for the switches, if you want to cast some of it is so warm a little on fire

this part is very important not to fool with voltage, if any problem can burn the laser, so check what is the voltage went in for laser in my case are 4.5 volt, as there are these batteries do not bother with resistors

put the functional circuit inside the module and paste it firmly with hot glue.
charge battery, click the button and. .. you just make your own laser, have fun with it