How to Make a 3D Printable USB Holder

by samve in Living > Organizing

4953 Views, 12 Favorites, 0 Comments

How to Make a 3D Printable USB Holder

10.png

At my house we have lots of flashdrives everywhere. So i made a 3D printable USB holder to gather them on the desk.

Draw a Triangular Base

56dc121b937ddbf6f4000304.jpeg

First, draw a triangle with a straight angle.I made the base 30 mm, the other sides will automatically have the same size (21.21mm)

Extrude the Shape to 100 Mm

56dc12362e7fb6051e000308.jpeg
56dc124715be4d50f800031d.jpeg

Extrude it for 100mm and rotate it.

Draw the USB Fittings

56dc125b4fbade7f330000dd.jpeg

Add a rectangle with the size of 4.5mm x 12mm to the sides, this is the size of a USB.

Extrude the Rectangular Fitting for 8 Mm

56dc126d2e7fb6051e00030a.jpeg

Extrude the rectangle for -8mm, the USB will certainly fit in.

Repeat on the Other Side and Use "pattern"

56dc128650e1b660c60000bf.jpeg
56dc129767400cdd1500001b.jpeg

Do the same on the other side and with the tool "pattern" you can repeat over the entire length of the base.

Use "fillet" to Smoothen the Edges

56dc12a84fbade3508000316.jpeg

With the tool "fillet" you can smoothen the edges and finalise the USB-holder.