Handy Nails/screws/nuts

this will help you have your nails/screws/nuts handy everywhere!

no more climbing up&down the ladder to get another screw/nail/nuts!

you don't need much for this project

-a small bottle (i used a middle-sized one)
-some foam (optional,its for more confortability)
-a magnet (preferably a powerfull one)
-forget the rubber bands,get some velcro,it's better
-glue stick

once again,you don't need a lot of tools for this product

all you need is:
-an xacto knife (or scissors)
-and a hot glue gun

ok so the first step is to remove the paper thing and cut the middle part which is soft to touch

now cut the part where the paper was glued on...

now cut what you have left in half...

now hot glue the magnet to one of the 2 parts you got from step 5,IN THE MIDDLE

now on the other half,cut a hole the size of the magnet,IN THE MIDDLE

now hot glue it on the same level as the magnet

now hot glue the foam on the side that touches the wrist so you can be more confortable

hot glue the velcro on one side and the strap with the other part of the velcro on the other side

well,you're pretty much done!

do you have any comments,questions,imporoovements?

post them here!

remember to rate my instructable.please?

BTW,mine can hold up to 60 screws