Hammer Door Knocker

by bravoechonovember1 in Workshop > Home Improvement

6680 Views, 105 Favorites, 0 Comments

Hammer Door Knocker

5510b8dcf92ea13c04000046.jpeg

this will show you how to make a hammer door knocker

It is loud and when someone knocks you will know someone is at your door

Parts and Tools Needed

unnamed-3.jpg
55120ee826ece2c7d30000eb.jpeg
IMG_4261.JPG
IMG_4266.JPG
  1. old wooden hammer
  2. piece of wood (mine was left over from cabinets)
  3. hinge (from a box of junk)
  4. piece of metal (from a metal chimney
  5. 6 small screws
  6. a drill
  7. drill bit (needs to be a little bit smaller than the screws)
  8. drill bit (needs to be bigger than the threads but not bigger than the head)

Drill Time!

IMG_4263.JPG
IMG_4265.JPG
IMG_4273.JPG
5511a8ad2f7cc6738c000013.jpeg

mark and drill the pilot holes and install the hinge

then mark where the hammer will hit and put the piece of metal there

you will need to use the bigger drill bit on the piece of metal (DO NOT DRILL INTO THE WOOD)

Then switch to the smaller drill bit and drill into the wood

Finish!

5510b1a0182470c17d000004.jpeg

finished!