Flashlight Holster Cheap and Easy
Learn how to create a flashlight holster for a Surefire G2 or similar flashlight with only some ducttape and an old messenger bag belt.
What You Need:
- Some duct tape
- an old shoulder belt or similar item, preferrably a 5 centimeter wide belt webbing.
- about 15 minutes of spare time
- an old shoulder belt or similar item, preferrably a 5 centimeter wide belt webbing.
- about 15 minutes of spare time
Step 2
first you tape the belt into a loop that fits to your belt.
Step 3
Fit in the lamp and then start wrapping the whole bundle with duct tape.
Step 4
Cut the end of the belt leaving enough material to cover the bulbside of the lamp.
Finish the cutted edge with a lighter and simply push it over the head of the flashlight.
You could also add some velcro or a button, but this solution works fine!
Attach it to your belt and have a nice day out, with your illuminating friend at your side!
(If you have a different flashlight try to tape some ducttape inside of the holster, with the sticky side to the outer tape, to get more space for your lamp. But remember: The tighter, the better!)
Finish the cutted edge with a lighter and simply push it over the head of the flashlight.
You could also add some velcro or a button, but this solution works fine!
Attach it to your belt and have a nice day out, with your illuminating friend at your side!
(If you have a different flashlight try to tape some ducttape inside of the holster, with the sticky side to the outer tape, to get more space for your lamp. But remember: The tighter, the better!)