Eee Pc 901 Ram Heat Sinks Mod

 so your thinking about cooling your eee down, well this might be just the thing for you.

 ram heat sinks
a small philips screwdriver
a dremal or sharp knife

 start by unscrewing the ram access hatch
there are just two philips screws then you will need some sort of plastic pry bar to lever the hatch off.

 remove the adhesive cover stripe and apply it to the 1 of the 4 black microprocessors(please tell me if im wrong)
 

 carefully replace the hatch and see were the heat sinks make contact with the hatch and draw on with a pencil.

 cut out the lines you made and make sure the heat sinks are now comming through the hatch.

 i am planning on cutting almost all of the hatch away and bolting on a perspecs windows and maybe adding some LED`s to light up the inside of my eee.

thank you for looking =]

just a small note:
i am by no means telling you to do this.
this may damage your pc.
invalidate your warranty.
may curs injury to yourself and others.
i am not responsible for any of the above happening.