Balloon Gun

compiled by: Moksham
Here is a list of material's u will need to make "The Ballon Gun" :::enjoy.


1plastic bottle
1 ballon(any size)
tape
small thermocol sheet(optional)
cutter(blade)
empty pen refills or some bb plastic bullets
a little paint ( any colour)
2 rubber bands.

cut the top of the bottle leaving 5 inches.

now open the capof the bottle top and put the balloon's mouth above it as shown in the fig 1 .

Now adjust the balloonto the center as shoen in the fig's 2,3.

After that place or put the rubber bands tightly on the balloon's mouth as shown in fig 4.

and last of all to make sure that the baloon does not move from its place we add a strong layer of tape.

Now take the thermocol sheet and with the help ofpaint and bottle cap draw or paint 9 circles as shown in fig 1.

After that hang the thermocol sheet somewhere to shoot at it but don't hang it in a populated spot.

first of all put your bullet inside the balloon and then strech the balloon aim snd shoot . as shown in the above pictures...