Easy T-shirt Printing Without Silk Screen

Sometimes you just want to say something without actually saying it. As a naturalised kiwi, I occasionally need to put cheeky Aussies in their place. This is my solution !!! ;-)
I had a bunch of free T-shirts and the paint was NZ$13 and I have enough for about 50 shirts.

Materials/Tools

A blank T-shirt

A Plasticising pocket (or Laminator sheet) same thing!

Sharp Knife

Iron

Picture of your design

Fabric Paint

Some paper towels/sheet of paper to iron thru

Patience!

So I googled a picture of Australias most famous inhabitant (no not Paul Hogan) a kangaroo (might be a wallaby I suppose - who knows or even cares!!)

I used a sharp craft knife for this

I ripped the top sheet from the plasticised pocket (or laminator pouch) and ironed it on the shirt (glue side down obviously)

(this is from a different shirt I made earlier (as they would say in Blue Peter))

I put a couple of sheets of paper inside the shirt to prevent "bleed through" and painted with fabric paint. I did two coats for even coverage. I let it dry for about five minutes.

I ironed the paint to "fix" it in accordance with the instructions. I used paper towels to stop the fabric paint transferring to the iron.

If you are careful you can remove and reuse the template. I wasn't careful!! You could stick the templates on silk screen material and reuse time and time again if you wanted. I forgot to take a picture at this point.

Job Done - Insults inbound!!

Have added another picture as have gone the whole hog and tried colours!!