Bowfishing Arrowhead
in this pdf or whatever you want to call it, will show you how to make a bow fishing arrowhead. the finished product is shown above.
Materials
you will need
a large safety pin
arrowhead
pliers
a large safety pin
arrowhead
pliers
Cut
what you want to do is draw two lines right next to each other away from the loop on the safety pin then cut it at the marks you made.
Put On
take the safety pin and put it on the arrow head. Set it up as shown In pic three and press and pull the prods apart at the same time so it slids on.
Bending the "prods"
now put it in the arrow and bend the prods down carefully. (dont worry it is strong when finished)