Bicycle Frame Protection
![frameprotect_-_8.jpg](/proxy/?url=https://content.instructables.com/FKK/OCRV/3V9EP27S7KJ/FKKOCRV3V9EP27S7KJ.jpg&filename=frameprotect_-_8.jpg)
an old innertube or two can be artfully used to protect your bicycle frame from damage.
Cut the Valve Out of Your Innertube
![frameprotect_-_1.jpg](/proxy/?url=https://content.instructables.com/F5T/0BYN/TUOEP27S7B0/F5T0BYNTUOEP27S7B0.jpg&filename=frameprotect_-_1.jpg)
![frameprotect_-_2.jpg](/proxy/?url=https://content.instructables.com/FP5/TNSV/G2ZEP27S7CD/FP5TNSVG2ZEP27S7CD.jpg&filename=frameprotect_-_2.jpg)
Split the Inner Tube Down the Center
![frameprotect_-_3.jpg](/proxy/?url=https://content.instructables.com/FUB/2SCZ/B03EP27S7DQ/FUB2SCZB03EP27S7DQ.jpg&filename=frameprotect_-_3.jpg)
This makes a flat strip. thinner tubes are good because they are lighter and narrower
Wrap Around the Frame
![frameprotect_-_4.jpg](/proxy/?url=https://content.instructables.com/FWL/4ZDK/721EP27S7F3/FWL4ZDK721EP27S7F3.jpg&filename=frameprotect_-_4.jpg)
you probably should remove the brake and gear cables so as not to trap them.
Cable Ties Are Good for Finishing at Both Ends
![frameprotect_-_5.jpg](/proxy/?url=https://content.instructables.com/FCS/JTD5/AKWEP27S7GG/FCSJTD5AKWEP27S7GG.jpg&filename=frameprotect_-_5.jpg)
![frameprotect_-_6.jpg](/proxy/?url=https://content.instructables.com/FMM/D48D/AO8EP27S7HT/FMMD48DAO8EP27S7HT.jpg&filename=frameprotect_-_6.jpg)
![frameprotect_-_7.jpg](/proxy/?url=https://content.instructables.com/FVI/VHXF/II2EP27S7J6/FVIVHXFII2EP27S7J6.jpg&filename=frameprotect_-_7.jpg)
Voila!
![frameprotect_-_8.jpg](/proxy/?url=https://content.instructables.com/FKK/OCRV/3V9EP27S7KJ/FKKOCRV3V9EP27S7KJ.jpg&filename=frameprotect_-_8.jpg)
cool huh. this is excellent in preventing damage to your frame from using U-Locks to lock them up. also great to dress down your bicycle for urban environments.