Arc Reactor

I will show you how to make a simple, but effective arc reactor.
The items you will need.
- Lid
- misc. wires
- black paper
- hot glue gun
- scissors
- bottle
- LED's
- plastic
- screws
- wires
- battery
- switch

I created the base of the arc reactor by taking a lid of a jar. I then drilled a hole in it for the wires to be thread through.

After drilling the hole in the base, I fed wires through it, attaching one to the LED's and the other to a switch which is then connected to a 12 volt battery.

After drilling the hole in the base, I fed wires through it, attaching one to the LED's and the other to a switch which is then connected to a 12 volt battery.

I created 3 small wire circles which will be used in the center of the reactor.

I then cut a black circle and painted it black, which was then glued to the body of the reactor.

I then created the body by attaching three small bits of plastic to the ring, with screws in the middle. A plastic mesh was added underneath. I then placed 2 golden rings above the mesh.