Airsoft Landmine

this is a really cool pyrotechnic airsoft landmine to be used with any kind of detonator, either remote or pressure (instructible coming soon!!) it is basicly just like my airsoft grenade accept more efficient and desined to have a half circle exlplosion.

Obtain Materials

for this mine you will need:
1 cardboard
2 a plastic baggie (any kind will do, i used a walmart sack cuz it was in sight and didn't move faster than me)
3 tape ( i used masking)
4 a firekraker ( i used visco cuz i had it, but for use with detonators, i would prolly use paper fuse)
5 airsoft bb's (duh)

Cut the Cardboard

cut the cardboard to a square about the size of youre firecracker

Attach the Firecraker

tape the explosive to the cardboard as shown so it dont move

Attach the Plastic Baggie

cut the bag to the right size and tape it first to the end and then to the sides as shown to form a poket like thingy.

Fill With Bb's

this is really self explanatory. PUT THE BB'S INTO THE POCKET! ITS NOT THAT HARD! LOOK AT THE PICTURE!

Finish

close the plastic over the bb's and make sure the fuse sticks out a little bit. then i think you can figure out what to do next (hint: light it and run!)
this can either be lit with a really long fuse or attached to a detonator. if enouf people ask me i will post both my remote detonator and my pressure detonator and my tripwire detonator(stilll in progress), all pyrotechnic and designed to be used with this mine.