A Wooden Toy Car

by sir woodster in Workshop > Cars

1090 Views, 4 Favorites, 0 Comments

A Wooden Toy Car

samsung henk 295.jpg
samsung henk 293.jpg
samsung henk 296.jpg

in this instructable i am going to make a cool toy car out of scrap wood and a old bike tire (only if you make your one wheels ) . kids love it , it takes you only a couple of hours , its a cool gift for cristmas and you can make endless variations .

so grab your scrap bin and make this project

and dont forget to vote on the wood contest ;D

The Body

samsung henk 255.jpg
samsung henk 256.jpg
samsung henk 258.jpg
  • i used a 2cm thick and 4cm wide piece of crap wood to make the body but a 2 by 2 cm piece would be easier
  • i think drawing the body free handed al lot more easy than making a tamplate , to avoid split ofs you can use some cleare packing tape
  • don`t throw the cut of ( picture 3 ) away you can use it for the head of the driver

Dril Some Holes

samsung henk 260.jpg
samsung henk 261.jpg
samsung henk 262.jpg
samsung henk 263.jpg

drill with a 6mm drill bit the holes for the axis on the marked spot in the picture

and than drill with a 8mm drill bit the hole fore the ``neck of the driver`` you can make that by glue in a small peace of wood

Making the Head

samsung henk 264.jpg
samsung henk 266.jpg
samsung henk 269.jpg
samsung henk 267.jpg
samsung henk 270.jpg

take the scrap peace of wood from step one and make a cube out of it

than drill a 8 mm hole in it but only half througt than put in some decorative spikes for the eys

and glue the whole peace on to the body

The Axis and the Wheels

samsung henk 271.jpg
samsung henk 272.jpg
samsung henk 273.jpg
samsung henk 274.jpg

you can cut the axes out of another peace of scrap wood i made them 4 cm long and 2mm thick

the wheels are made oud of 2cm by 2cm of wood . i roundet over the edges with a file and than cutted of 3 mm thick peaces

Rubber Around the Wheels

samsung henk 275.jpg
samsung henk 278.jpg
samsung henk 280.jpg
samsung henk 281.jpg
samsung henk 282.jpg
samsung henk 283.jpg
samsung henk 284.jpg
samsung henk 285.jpg

for this part you need the inner tire of a bicycle and some all glue.

cut 3 peaces of tire of the same ticnes as the wheels , than make a cut in 2 of the rubbers and glue the first 2 peaces arount the wooden wheel .

put some extra glue on the third (uncut) peace of rubber an force it around the hole thing .this dont need any clamping pressure .

repead the proces 3 times and the weels are ready

The Last Step :D

samsung henk 286.jpg
samsung henk 287.jpg
samsung henk 288.jpg
samsung henk 289.jpg
samsung henk 291.jpg
samsung henk 292.jpg
samsung henk 294.jpg

try finding the center of the wheels. this dont has to be purfect but the more center the more smoother the ride.

than drill a 3 mm hole in the center and put come glue in it . than put the axis true (picture 3 ) .

than put the wheel and axis throught the holes in the body of the car. put some glue on the and and put the other wheel on .

now you are done . and ready to make somebody happy