a Hot Horse Carriage Robot Rc Toys

Taking advantage of free time to make a new toy is a very fun thing. Especially if the toy is very cute,

 unique and interesting. And this is one of the toys 

that can be used as an option to make it in your spare time. Namely an rc horse carriage

The Ingredients are we need:

Brown Impraboard

Red impraboard

Blue Impraboard

Small ice cream sticks

Big ice cream sticks

Glue gun

soldering tin

color wire

2 pieces gearbox dynamo

1 piece 5 channel rc module

Skewers

Straw

8 bolt nuts

Used markers

Cardboard box

3 rechargable batteries 1.2 volt 2600mah

The tools are we need :

Small grinder

Electric soldering iron

Glue gun

Scissors

Ruler

Cutting pliers

screwdriver set

stationery term

Pen

Manufacturing steps:

1. Draw the parts of the horse that will be attached to the alpaboard to be cut out. As in the attached picture.

2. Draw the parts of the cart that will be pasted on the alpaboard to be cut. This is to avoid design failure if it is directly on the alpaboard. And the top of the alpaboard is not all light colored.

3. After the parts are pasted then cut the parts well.

4. Assemble the parts properly, one being a horse and the other being a cart or chariot.

5. Assemble the dynamo gearbox driver and the 4 legs first, then the turner part in the horse body and the dynamo gear box sticker in the carriage next to the lower driver.

6. Assemble the electrical schematic as shown in the picture

7. Enjoy the fun horse carriage toy.

8. This RC horse carriage was assembled by Achmad Choiruman and two of his students: Gilang grade 5 and Ibrahim, grade 4 of Al Falah Darussalam elementary school.