X Y Speaker Laser-show

Here I will show how to make a audio lasershow. First I have two videos for you.




I have accomplished with laser show program for mac(is also possible with a frequency generator program)and music cool effects.

The vibrations from the 2 base speakers (with 1 mirror an each speaker) makes the laserbeam move with the music and the frequencies (audio).

Hotgluepistole
laser
2x base speaker
2x mirrores (1,5cm X 1,5cm)
an borde (wood)
straw
2x plastic pices(1mm thick)
wooden stix (p.ex. "mikado stix")
styropohr

Fix the mirrors as on the pocturs on and cut the strows.
Saw the plastic pices.(so they fit to the size of the speakers)

Here you have to glue the mirror pices on the speakers.It`s very important that one of the mirror module is put in an vertical position and the other module horicontal.

Now we are almost done.
I have gluded the speakers on a pice of wood and I stabilisaisde with a styropohr-block.(picture)
I simply put the laserpen into a styropohr-block.(picture)
This styropoheblock has to be abaut the same size as the speakers and the hole has to be in the level as the mirrors.

NOW YOU HAWE MAID YOUR OWN X Y AUDIO LASERSHOW!

If you have problems or questions just whrite me an PM.