Wrist Shooter

We made a wrist shooter where when you pull the bullet back it shoots 10-15 feet.

For our supplies to make a wrist shooter we had to use, Tape, little sting, cardboard, paper, spring, wood, box cutters and scissors.

Step one Grab your cardboard trace your shape number them 1-28 outlines then use a box cutter to cut out your pieces.

After you cut your pieces out sort them and number them off in the order 1- 28 put them together in then start your build.

First you will want to put it together 1-12. At about half you will need to roll up a piece of paper and place in the center this will be your barrel your your bullet. Then you will want to grab your spring and test if it fits.

Next you will want to do 13-18. After that take a small piece of wood and cut it to about 1 3/4 inch place it inside your spring then glue a little piece of wood to the top of it to complete your bullet.

Step 19-25 of putting your cardboard together. Next grab some cardboard and wrap it in the way of a double barrel and place that in the back of your shooter.

Then finish 26-28 steps. Next add some detail and cuts to make your shooter look modern and realistic and or cool. You can also add color and designs to it.

In the end this is what your shooter should look like in the end.