Worry Dolls

by Shania S in Craft > Fiber Arts

2460 Views, 15 Favorites, 0 Comments

Worry Dolls

IMG_2964.JPG

When life's worries become too much to handle yourself, let these Worry Dolls help! Make one for each of your worries, tell it your problems and place it underneath your pillow at night. The Worry Doll will take over the worrying for you and allow you a peaceful night's sleep.

These tiny little Worry Dolls are quick and easy to make and can be personalised to your desire. Change up the colours, use different shaped beads or even play with the twist ties to add some clothes. Make as many or as little as you would like and never worry again!

Collect Materials and Equipment

IMG_2944.JPG

MATERIALS:

2 x Plastic Covered Twist Ties

1 x Large Bead

Wool (in colour of your choice)

EQUIPMENT:

Scissors

Glue

IMG_2945.JPG
IMG_2946.JPG
IMG_2947.JPG

Collect both of the Twist Ties.

Position them in an X, as shown in the photo above, and twist together at the centre.

IMG_2948.JPG
IMG_2949.JPG

Fold the bottom two ends upwards towards the centre, as shown in the photo above.

Twist the folded halves together to form the legs.

IMG_2950.JPG

Push the top ends down so that they form a horizontal line across the top of the body.

IMG_2951.JPG

Fold the top ends horizontally, before making a second vertical fold.

The twist ties should now appear as they do in the photo above.

IMG_2952.JPG
IMG_2953.JPG

Twist together the horizontal wire to form the arms.

Next, twist together the two vertical wires to form the neck.

IMG_2954.JPG

Collect your Twist Tie Body and the wool.

IMG_2955.JPG
IMG_2956.JPG

Starting from the centre of the body, wrap the wool around the entire Twist Tie Body.

You should finish at the top of the neck, leaving some of the wires showing.

IMG_2957.JPG
IMG_2958.JPG

Cut the wool from the rest of the ball, leaving a some excess for later use.

IMG_2959.JPG

Collect your Worry Doll Body and the bead.

IMG_2960.JPG
IMG_2961.JPG

Thread the bead onto the excess wool and push it down onto the wire.

Make sure the bead is pushed far enough so that it sits securely on top of the shoulders.

If you need to, you can place some glue on the bottom of the neck before you push the bead onto it, to help hold the bead in place.

IMG_2962.JPG
IMG_2963.JPG

Fray the excess wool above the bead by pulling the individual threads apart with your fingers.

This step is optional, but it does give your Worry Doll a cool hairstyle.

IMG_2963.JPG

Your Worry Doll is complete!