Woodshop Guitar Stand
THIS PROJECT WILL HELP GIVE A GUIDE TO MAKING A SIMPLE GUITAR STAND using only wood and woodshop machines
Supplies
you will need 4 2x30 long boards
2 2x10 boards
and 4 dowel rods.
Step 1 Get and Cut Wood
all the wood is shown here.
cut one board into 4 2x30s
one into 2 2x10s
and cut 3 dowel rods to your desired height but one of them to 5 inch segments to hold your instruments up
Step 2 Drill
drill one of your 2x30s to have holes on the ends and on one face of it to insert dowel rods
and drill another one to have holes on the ends to be connecting the top and bottom pieces
Step 3 Drilling Again
drill the 2x10s to have a hole on your desired width to hold the guitars off the ground.
an example of where i put mine is shown.
Step 4 Style
if desired you can paint your wood as i did.
Step 5 Assemble
use either glue or a drill and nails as i did to put two 2x30s together on the top and bottom and connect the 2x10s to the 2x30s as legs to help it stand
Step 6 Its All Done
congratulations on your deconstructable gu